Back to Blog
#Sinter Silver#Die Attach

Joinspire Pressureless Silver Sintering for Semiconductor Packaging

Joinspire Research Team

Joinspire’s pressureless silver sintering pastes provide thermally and electrically conductive die attach for semiconductor packaging. The range includes PMAg01 for gold and silver interfaces, with thermal conductivity above 200 W/(m·K); PL-400CP for bare-copper bonding; and PL-500LT for sintering at temperatures as low as 180°C.

Share this article

WhatsAppX / Twitter

Share on WeChat

Article QR code

Scan with WeChat, then use the top-right menu to share. On your phone, you can also copy the title and link and paste them into a WeChat chat.

In power semiconductors, RF devices, and high-power LEDs, the die-attach layer helps carry heat from the chip to the substrate. Joinspire's pressureless silver sintering pastes combine high thermal and electrical conductivity with a bonding process that requires no externally applied sintering pressure.

The range includes PMAg01 for gold and silver interfaces, along with dedicated formulations for bare copper and low-temperature processing.

01-pmag01-pressureless-silver.jpg

High thermal conductivity with PMAg01

PMAg01 provides thermal conductivity above 200 W/(m·K) and volume resistivity below 6 µΩ·cm, with an air sintering temperature range of 230–260°C.

During sintering, silver particles bond to form a conductive layer between the die and substrate. This layer provides a path for heat and electrical current, making material selection an important part of package design. PMAg01 is intended for applications using gold or silver bonding surfaces.

Explore PMAg01 specifications.

Cross-sectional and surface views of a sintered silver layer.

image.png

Material options for different bonding interfaces

Different applications need different formulations. Joinspire's pressureless silver range provides the following options:

| Grade | Bonding interface | Process focus | | ------------ | ----------------- | ----------------------------------------------------------------- | | PMAg01 | Silver or gold | Pressureless sintering in air at 230–260°C | | PL-400CP | Bare copper | Direct bonding to bare copper; pressureless sintering in nitrogen | | PL-500LT | Silver or gold | Low-temperature sintering in air, from 180°C |

PL-400CP: pressureless sintering on bare copper

PL-400CP is formulated for direct bonding to bare copper through pressureless sintering in nitrogen. It provides a dedicated material option for packages with bare-copper bonding surfaces.

image

04-pl400cp-bare-copper.jpg

PL-500LT: low-temperature silver sintering

For assemblies with a lower processing-temperature limit, PL-500LT supports pressureless sintering in air at temperatures as low as 180°C, on gold or silver bonding surfaces. The heating profile and hold time should be selected to suit the assembly and process requirements.

image

The range also offers alternatives for applications currently using materials such as Kyocera's CT2700 series, with grade selection based on the bonding interface, process conditions, and reliability requirements.

05-pl500lt-low-temperature.jpg

Consistent processing from dispensing to sintering

Dispensing behavior, die placement, bondline thickness, and the sintering profile all influence the finished joint. A material should therefore be evaluated within the process used to manufacture the device.

Joinspire's dispensing demonstration below shows patterns after 1 hour and 12 hours. Working life should be confirmed for the selected grade and production conditions.

image

03-dispensing-patterns.jpg

Dispensing patterns shown after 1 hour and 12 hours.

Evaluation on the actual assembly should cover bond quality, die shear strength, thermal performance, and the reliability tests required for the application. These results help establish suitable processing conditions for production.

Find the right material for your application

Share your die size, die-backside and substrate finishes, process profile, and target performance. Our team can help identify a suitable Joinspire grade and discuss a sample evaluation for your application.

Discuss your application with Joinspire, or email sales@joinspire.org.

Ready to innovate with us?

Contact our team to learn how our advanced materials can transform your manufacturing.